RME ADI-2/4 Pro EX Convertitore audio digitale

RME ADI-2/4 Pro EX — Reference AD/DA Conversion for Mastering Studios

The RME ADI-2/4 Pro EX sits at the top of RME's converter lineup as a 2-channel analog-to-digital and 4-channel digital-to-analog converter paired with a dual-stage headphone amplifier. Housed in a half-rack 1U enclosure, it delivers 32-bit / 768 kHz conversion with up to 127 dBA signal-to-noise ratio for mastering rooms and high-end mixing setups. The unit combines USB audio interface, multi-format digital converter, RIAA phono preamp, and DSD record/playback in one chassis.

What Sets This Converter Apart

At the heart of the unit sit ESS's latest-generation ES9823Pro A/D and ES9039Q2M D/A converters, optimized for lower distortion and improved SNR. RME's SteadyClock EX technology is factory-calibrated to ±1 ppm and offers ±50 ppm adjustment in 0.1 ppm increments, allowing precise synchronization without a dedicated word clock input. Extended Linear Analog Range (ELAR) filtering preserves signal integrity across the entire analog path.

Conversion Performance and Clock Stability

The ES9823Pro ADC and ES9039Q2M DAC deliver exceptionally low distortion figures, while SteadyClock EX keeps jitter influence on conversion near zero.

• Maximum Sample Rate: 768 kHz — supports high-resolution recording well beyond standard studio rates
• Bit Depth: 32 bit — captures the full dynamic range of source material without truncation
• Signal-to-Noise Ratio: 127 dBA (A-weighted, AES17) — reference-grade noise floor for critical listening
• THD: < -130 dB (0.0000316%) — vanishingly low harmonic distortion at 0 dBFS
• SteadyClock EX — factory-calibrated internal clock at ±1 ppm accuracy

Analog and Digital I/O Configuration

Two servo-balanced analog inputs on combo XLR/TRS jacks feed the ADC, while four analog outputs (XLR plus TRS) handle monitor sends and parallel headphone paths. Digital I/O includes AES/EBU, coaxial S/PDIF, and an optical port doubling as ADAT.

• Analog Inputs: 2 × XLR/TRS combo (servo-balanced) — switchable reference levels from +24 dBu to -35 dBu via digital gain
• Analog Outputs: 4 (2 × XLR balanced + 2 × 6.3 mm TRS) — independent line and headphone signal paths
• Digital I/O — AES/EBU on XLR, coaxial S/PDIF on RCA, and optical S/PDIF/ADAT for multi-format conversion with monitoring
• Computer Interface: USB-C (Class Compliant UAC 2.0) — stereo 2-in/2-out or multichannel 6-in/8-out modes

Headphone Amplifier and Power Architecture

Three discrete power modes — IEM, Lo-Power, and Hi-Power — match the output to any transducer, while True Balanced mode unlocks +27.5 dBu (18.4 V) for balanced headphone operation via the 4.4 mm Pentaconn jack.

• Headphone Outputs: 2 × 6.3 mm TRS + 1 × 4.4 mm Pentaconn (balanced) — drives IEMs through planar magnetics from a single unit
• Maximum Output (Balanced Phones): +27.5 dBu (18.4 V) — sufficient headroom for high-impedance studio headphones
• Channel Separation: > 130 dB @ 1 kHz — preserves stereo imaging accuracy
• Power Supply: External switching PSU, 12 V / 3.3 A, 40 W — lockable DC connector with polarity and overvoltage protection
• Form Factor — half-rack 1U desktop format at 215 × 44 × 160 mm and 1.2 kg, compatible with the RM19-III rackmount adapter

Who This Converter Is Built For

The unit is the right choice for mastering engineers, mixing professionals, and high-end monitoring setups that need a transparent AD/DA front end with a built-in reference headphone amplifier. Its four analog outputs make it ideal for mixbus monitoring with parallel cue paths, while AES/EBU and S/PDIF connections integrate cleanly into digital monitor chains. Audiophiles will appreciate the integrated RIAA equalization with selectable 94 kΩ / 47 kΩ balanced input impedances.